冷凝法甲苯回收系统性能研究与优化

基于已有典型工业挥发性有机物甲苯设计的一套冷凝法回收系统,对其进行数值模拟和优化设计。运用物性软件REFPROP对甲苯负荷及制冷系统性能进行了模拟。通过对系统的模拟计算,研究了冷却级蒸发温度、冷凝温度以及甲苯混合气体入口温度对该冷凝法甲苯回收系统的性能影响,并针对冷却级温度影响进行了经济性分析。在此基础上,提出了冷量回收的优化方案,并与原有方案进行了对比分析,为进一步优化设计提供了理论依据。优化结果表明:系统预冷级负荷降低69.6%,系统的能耗降低38.9%,COP增大61.4%,压缩机排气温度下降7.7℃。     

基于微机电系统技术的高性能集成型微富集器（英文）

由于大部分环境样品的浓度非常低,为了实现其直接检测,提出将一种集成化的微型富集器应用到色谱系统中。富集器可实现色谱系统的进样与样品富集,能将色谱仪的检测限提高1~2个数量级。设计的富集器采用了高容量4平行通道结构,沟道内填充了高吸附率的Tenax-TA吸附材料,来实现对环境样品中挥发性有机化合物组分的富集。此外,为了密闭热解吸过程中所释放的组分,在微型富集器后集成了微型阀。试验结果表明,研制的微型富集器取得了15倍以上的富集因子。而且,通过微阀的控制,色谱峰的拖尾和峰展宽得到了有效的控制。因此,该微型富集器可广泛应用到环境样品的快速检测中,提高各检测器对复杂环境的适应能力。     

The depth spectrums of constacyclic codes over finite chain rings

In light of the generator polynomials of constacyclic codes over finite chain rings, the depth spectrum of constacyclic codes can be determined if (n,p)=1$(n,p)=1$.     

定轴转动中打击中心位置分析

刚体定轴转动的打击中心是一个很重要的力学概念,但在很多《大学物理》教材中都没有介绍.本文以一根质量均匀分布的细杆绕端点作定轴转动为例,首先从动力学的角度,分析刚体的受力和力矩,根据动力学方程,分别计算出打击中心位置;然后从运动学角度出发,以转轴O点的切向速度和切向加速度等于零为条件,再分别寻找打击中心的位置.计算结果表明:上述4种方法得出的刚体打击中心位置是相同的.最后简介刚体打击中心在体育运动、日常生活中一些应用.     

The Ising version of the t–J model

The t–J model is analysed in the limit of strong anisotropy, where the transverse components of electron spin are neglected. We propose a slave-particle-type approach that is valid, in contradiction to many of the standard approaches, in the low-doping regime and becomes exact for a half-filled system. We describe an effective method that allows to numerically study the system with the no-double-occupancy constraint rigorously taken into account at each lattice site. Then, we use this approach to demonstrate the destruction of the antiferromagnetic order by increasing the doping and formation of Nagaoka polarons in the strong interaction regime.     

Preparation and dielectric properties of the lead-free BaFe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript> ceramics obtained from mechanically triggered powder

In the paper the influence of mechanical activation of the powder on the final dielectric properties lead-free Ba(Fe_1/2Nb_1/2)O₃ (BFN) ceramic was examined. The BFN ceramics were obtained by 3-steps route. Firstly, the substrates were pre-homogenized in a planetary ball mill. Than, the powder was activated in vibratory mill (the shaker type SPEX 8000 Mixer Mill) for different duration between 25 h and 100 h. The influence of the milling time on the BFN powder was monitored by X-ray diffraction. The diffraction data confirmed that the milling process of the starting components is accompanied by partial synthesis of the BFN materials. The longer of the high-energy milling duration the powders results in increasing the amount of amorphous/nanocrystalline content. The mechanically activated materials were sintered in order to obtain the ceramic samples. During this temperature treatment the final crystallisation of the powder appeared what was confirmed by XRD studies. The performed dielectric measurements have revealed the reduction of the dielectric loss of the BFN ceramics compared to materials obtained by classic methods.     

Tb doping induced enhancement of anomalous Hall effect in NiFe films

Tbx(Ni0.8Fe0.2)1-x films with x≤0.14 are fabricated and the anomalous Hall effect is studied.The intrinsic anomalous Hall conductivity and the extrinsic one from the impurity and phonon induced scattering both increase with increasing x.The enhancement of the intrinsic anomalous Hall conductivity is ascribed to both the weak spin–orbit coupling enhancement and the Fermi level shift.The enhancement of the extrinsic term comes from the changes of both Fermi level and impurity distribution.In contrast,the in-plane and the out-of-plane uniaxial anisotropies in the Tb Ni Fe films change little with x.The enhancement of the Hall angle by Tb doping is helpful for practical applications of the Hall devices.     

Reception pattern influence on magnetoacoustic tomography with magnetic induction

Based on the acoustic radiation theory of a dipole source,the influence of the transducer reception pattern is studied for magnetoacoustic tomography with magnetic induction(MAT-MI).Numerical studies are conducted to simulate acoustic pressures,waveforms,and reconstructed images with unidirectional,omnidirectional,and strong directional transducers.With the analyses of equivalent and projection sources,the influences of the model dimension and the layer effect are qualitatively analyzed to evaluate the performance of MAT-MI.Three-dimensional simulation studies show that the strong directional transducer with a large radius can reduce the influences of equivalent sources,projection sources,and the layer effect effectively,resulting in enhanced pressure and improved image contrast,which is beneficial for boundary pressure extraction in conductivity reconstruction.The reconstructed conductivity contrast images present the conductivity boundaries as stripes with different contrasts and polarities,representing the values and directions of the conductivity changes of the scanned layer.The favorable results provide solid evidence for transducer selection and suggest potential practical applications of MAT-MI in biomedical imaging.     

Facile Preparation of α‐Zirconium Phosphate/Polyaniline Hybrid Film for Detecting Potassium Ion in a Wide Linear Range

A novel α‐zirconium phosphate/polyaniline (α‐ZrP/PANI) hybrid film used as K⁺ ion sensor was fabricated on carbon paper by electrochemical method. Mechanisms of film formation and detection of K⁺ ions were also proposed. The exfoliated α‐ZrP was mixed with PANI and deposited on carbon paper. The resultant α‐ZrP/PANI film exhibited a good current response to K⁺ ion with different concentrations. It also showed a wide logarithmic linear response in detecting K⁺ ions in the ranges of 10^?8–10^?4 M and 10^?4–10^?2 M, respectively. The results can be attributed to the synergetic effect of α‐ZrP and PANI.     

Preparation of Polyaniline/Au0 Nanocomposites Modified Electrode and Application for Hydrazine Detection

The PANI/Au₀ nanocomposite films were successfully prepared on glassy carbon electrode (GCE) using a simple alternate adsorption of water soluble polyaniline (PANI) and . The growth of the films was monitored by UV? Vis spectroscopy and cyclic voltammetry. was in‐situ reduced in the film due to the redox interaction between PANI and , without extra reductant. The ultrafine Au nanoparticles with the size of 2–4 nm were observed by transmission electron spectroscopy. The existence of zero‐valence Au nanocrystals (Au₀) was confirmed by X‐ray photoelectron spectroscopy, X‐ray Diffraction and FTIR. PANI in the nano‐structured PANI/Au₀ composite films displayed a good redox activity in neutral pH solution. The as‐obtained PANI/Au₀/GCE presents an excellent electrocatalytic activity to hydrazine oxidation, and the mechanism of hydrazine oxidation was studied. The calibration curve on (PANI/Au₀)₅/GCE was obtained in the concentration range of 0.01–6 mM with the detection limit of 1 µM (S/N>3). The modified electrode has a great potential for hydrazine sensor application due to its ease of fabrication, good reproducibility and high stability.